Fujitsu Eternus DX60 User Manual page 112

Chapter 6 Cable Connection
> 6.3 Fibre Channel Cable Connection (For Fibre Channel)
Procedure
1
2
2-1
2-2
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Remove the connector cover of Fibre Channel port.
Remove the connector cover attached to the Fibre Channel port of the controller 0 (CM#0)
or controller 1 (CM#1).
Connector cover
Keep the removed connector cover in a safe place where they will
IMPORTANT
not be lost.
Connect the Fibre Channel cable to the ETERNUS DX60/DX80/DX90.
Remove the covers from the Fibre Channel cable connectors.
Insert the Fibre Channel cable connectors in the controller 0 (CM#0) and controller 1
(CM#1) Fibre Channel ports.
112
Copyright 2010 FUJITSU LIMITED