Fujitsu Eternus DX60 User Manual page 134

Chapter 6 Cable Connection
> 6.7 Power Cord Connection
3
4
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power cord clamps removed in
Connect the power cords (AC input cables) (4m) supplied with the AC outlet box
to the inlet of the AC outlet box.
The AC outlet box is shipped with the power cord connected to the
inlets.
Connecting the power cords (AC input cables) to different power
IMPORTANT
systems, on the AC outlet box A and C, and the AC outlet box B and
D sides respectively, prevents power supply facility failures.
WARNING
•
CAUTION
•
•
•
Step 1.
AC input cables
Connect to power outlets.
Do Not
Do not connect power cords or other cables during
thunderstorms, as lightning can result in fire or electric shock.
Do
Be sure to fully insert each plug into its socket. Failure to do
so may lead to fire or electrical shock.
Do Not
When disconnecting the power plug, be sure to pull from the
plug and not the cord. Pulling the cord may expose or snap
the inner wires, which can lead to fire or electrical shock.
Do not use the server service outlet to connect the device
power cord.
134
Copyright 2010 FUJITSU LIMITED