Fujitsu Eternus DX60 User Manual page 118

Chapter 6 Cable Connection
> 6.6 MiniSAS Cable Connection (For Drive Enclosures)
MiniSAS cable connection procedure
The following explains how to connect the miniSAS cable.
IMPORTANT
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
• To help with miniSAS cable management and prevent incorrect
connections, attach labels to the miniSAS cables and make a note of
connection origins and destinations.
• When connecting miniSAS cables, always check the symbols on the
connector and port are matching.
- SAS (OUT) of CE or DE: Attach the connector with the
the port with the
SAS (OUT) port
- SAS (IN) of DE: Attach the connector with the
with the symbol.
SAS (IN) port
• When connecting miniSAS cables, check the connector orientation and
then firmly push it all the way in.
When disconnecting miniSAS cables, use the pull-tab to extract the
connector.
118
symbol.
Plug connecting to SAS (OUT) port
Plug connecting to SAS (IN) port
Copyright 2010 FUJITSU LIMITED
symbol to
symbol to the port