Figure 2.24 Expander (3.5" Type Drive Enclosure); Figure 2.25 Power Supply Unit (3.5" Type Drive Enclosure) - Fujitsu Eternus DX60 User Manual

Chapter 2 Components
> 2.3 3.5" Type Drive Enclosure
Expander
Figure 2.24

Figure 2.24 Expander (3.5" type drive enclosure)

Power supply unit
Figure 2.25

Figure 2.25 Power supply unit (3.5" type drive enclosure)

P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
shows the expander.
IDENTIFY LED
Blinks blue ( ) or turns off ( ) as ordered via GUI to
identify the enclosure installation locations.
SAS LINKUP LED
Glows green (
SAS LINKUP LED
Glows green (
Glows orange (
SAS (IN) port
miniSAS cable connects here.
SAS (OUT) port
miniSAS cable connects here.
This is not used.
shows the power supply unit.
The power supply unit has two internal cooling fans.
STATUS LED
Blinks green (
but DC power is turned off.
Glows green (
and DC power is turned on.
Glows orange (
or power supply.
) when link has been established.
) when link has been established.
) to indicate a fault has been detected.
UNIT READY/FAULT LED
Glows green ( ) during normal operation.
Glows orange ( ) during the post power on initialization phase.
Also glows orange ( ) to indicate a fault has been detected.
Inlet
Power cord connects here.
) when AC power is supplied (power cord is connected)
) when AC power is supplied (power cord is connected)
) to indicate a fault has been detected in a fan
66
Copyright 2010 FUJITSU LIMITED