Fujitsu Eternus DX60 User Manual page 189

Chapter 8 Installing Optional Products
> 8.1 Disk Installation
For 2.5" disks
Procedure
1
2
3
4
5
5-1
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Refer to "ETERNUS DX60/DX80/DX90 Disk storage system Package Contents"
and check that no items are missing.
"ETERNUS DX60/DX80/DX90 Disk storage system Package Contents"
Refer
Check that all components of the ETERNUS DX60/DX80/DX90 are in normal
status, using the Storage System Status screen of GUI.
Wear a wrist strap.
For how to wear a wrist strap, refer to
Remove the dummy disk unit from the slot in which the disk is to be installed.
Simultaneously push into the tabs in the upper and lower parts of the dummy disk unit, and
pull it straight out of the disk slot.
Dummy disk unit
Tabs
The removed dummy disk unit should be retained for future use.
IMPORTANT
Install the new disk.
Press the catch on the disk lock lever to unlock it.
Catch
Lock lever
"3.6 Wearing the Wrist Strap" (page
189
81).
Copyright 2010 FUJITSU LIMITED