Rack Installation - Fujitsu Eternus DX60 User Manual

Disk storage system
Hide thumbs Also See for Eternus DX60:
Table of Contents

Advertisement

Chapter 5 Installation
>

5.2 Rack Installation

AC Outlet Boxes Connected
Table 5.3
Controller
Enclosure
Drive Enclosure
AC Outlet Box (1U)
AC Outlet Box (2U)
No. of power outlets
5.2
Rack Installation
This section describes the procedure for installing the ETERNUS DX60/DX80/DX90 in a rack.
Make sure to check "ETERNUS DX60/DX80/DX90 Disk storage system Safety Precautions"
before installation. Also refer to the manual provided with racks.
Refer
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Required number of power outlets (when AC outlet boxes are connected)
Component
1
0
1
1
2
"ETERNUS DX60/DX80/DX90 Disk storage system Safety Precautions"
Manual provided with racks
Do
CAUTION
Make sure to wear a wrist strap before starting each operation, as
failure to discharge static electricity may cause a device failure.
Do not remove it until the operation is complete.
If components are installed in a way other as described herein,
damage and/or device failure or electrical shock may occur.
Do not install the ETERNUS DX60/DX80/DX90 with cables, such as
power cords, connected.
This device contains delicate components, and should be handled
gently. Do not drop or knock the device against the rack when
installing it. Also, do not knock the other devices installed in the
rack.
If no other components are installed, attach the blind panels
provided with the rack.
Combination pattern
1
1
1
1
2
3
4
5
6
7
8
2
3
4
5
4
6
8
10
88
1
1
9
0
5
6
9
1
2
2
4
Copyright 2010 FUJITSU LIMITED

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx80Eternus dx90

Table of Contents