Appendix B Events Detected By Serverview - Fujitsu Eternus DX60 User Manual

Appendix B Events detected by ServerView

This chapter explains the ETERNUS DX60/DX80/DX90 events detected by ServerView.
Table B.1
Item fault
Item warning
Sensor status changed
Maintenance required
Information event
(*1)
Item fault to normal
(*1)
Item warning to normal
(*1)
Sensor status changed
to normal
(*1)
*1:
The detected event notification settings can be changed via the GUI or CLI.
For details, refer to the "ETERNUS DX60/DX80/DX90 Web GUI User Guide" or "ETERNUS
DX60/DX80/DX90 CLI User Guide".
Refer
P3AM-3042-06ENZ0
ServerView event list
Event
CRITICAL
MAJOR
CRITICAL
CRITICAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
INFORMATIONAL
The default setting is "Disable" (no notification).
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS DX60/DX80/DX90 CLI User Guide"
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Specific TRAP
Severity
number
2
5
6
7
9
22
25
26
229
Meaning
Hardware error occurred.
Preventive Maintenance Hardware
has been detected.
Temperature abnormality has been
detected.
An error that requires maintenance
has been detected.
Information
"Item fault" type problem has been
resolved.
"Item warning" type problem has been
resolved.
"Sensor status changed" type problem
has been resolved.
Copyright 2010 FUJITSU LIMITED