Operation Management/Device Monitoring; Operation Management Interface - Fujitsu ETERNUS DX100 S4 Design Manual

2. Basic Functions

Operation Management/Device Monitoring

Operation Management/Device Monitoring

Operation Management Interface

Operation management software can be selected in the ETERNUS DX according to the environ-
ment of the user.
ETERNUS Web GUI and ETERNUS CLI are embedded in the ETERNUS DX controllers.
Shared folder (NFS and CIFS) operations can be performed with ETERNUS Web GUI or ETERNUS
CLI for the NAS environment settings.
The setting and display functions can also be used with ETERNUS SF Web Console.
■
ETERNUS Web GUI
ETERNUS Web GUI is a program for settings and operation management that is embedded in the
ETERNUS DX and accessed by using a web browser via http or https.
ETERNUS Web GUI has an easy-to-use design that makes intuitive operation possible.
The settings that are required for the ETERNUS DX initial installation can be easily performed by
following the wizard and inputting the parameters for the displayed setting items.
SSL v3 and TLS are supported for https connections. However, when using https connections, it is
required to register a server certification in advance or self-generate a server certification. Self-
generated server certifications are not already certified with an official certification authority regis-
tered in web browsers. Therefore, some web browsers will display warnings. Once a server certifi-
cation is installed in a web browser, the warning will not be displayed again.
When operations are managed using ETERNUS Web GUI, a Web browser must be prepared in the
administration terminal.
For details on the operating environment of ETERNUS Web GUI, refer to "ETERNUS Web GUI Us-
er's Guide" or "Configuration Guide (Web GUI)".
When using ETERNUS Web GUI to connect the ETERNUS DX, the default port number is 80 for
http.
■
ETERNUS CLI
ETERNUS CLI supports Telnet or SSH connections. The ETERNUS DX can be configured and moni-
tored using commands and command scripts.
With the ETERNUS CLI, SSH v2 encrypted connections can be used. SSH server keys differ for each
storage system, and must be generated by the SSH server before using SSH.
Password authentication and client public key authentication are supported as authentication
methods for SSH.
For details on supported client public key types, refer to
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
"User Authentication" (page
79
Copyright 2023 Fujitsu Limited
72).
P3AM-7642-32ENZ0