Fujitsu Eternus DX60 User Manual page 23

Chapter 1 Overview
> 1.1 System Features
Easy Installation and Operation Management
• Settings of the ETERNUS DX60/DX80/DX90 and its operation management can be
performed by GUI that uses a Web browser (hereafter referred to as "GUI"), or CLI that uses
commands and command scripts.
Settings required for the ETERNUS DX60/DX80/DX90 initial installation can be easily
performed by following the GUI wizard and inputting parameters for displayed setting items.
The ETERNUS DX60/DX80/DX90 can be configured, and its status can be displayed and
monitored using GUI or CLI.
• ETERNUS SF Express
ETERNUS SF Express is a storage system introduction and operation support software for
the user who had put off the introduction of the storage system up to now because of
"Difficulty" and "Introduction and operation cost increase".
ETERNUS SF Express is an easy to use software addition to ETERNUS DX Disk storage
system, in order to facilitate management of ETERNUS DX Disk storage system as well as
leverage ETERNUS DX Disk storage system functionality like Snapshots, Cloning or
Replication.
For details of ETERNUS SF Express and how to download it, refer to the following web-site:
http://www.fujitsu.com/global/support/computing/storage/software/esf-express.html
High scalability and versatile connectivity
• Utilizes the latest disk technology
Both 3.5" SAS disks
300GB; 10,000rpm) are available.
For data backup and archival purposes the ETERNUS DX60/DX80/DX90 is able to use large
capacity, highly cost effective 3.5" Nearline SAS disks
Flash memory based 3.5" SSDs
also available (except for the ETERNUS DX60, which does not support SSDs).
*1:
*2:
• Supports capacity expansion during system operation
-
-
-
• High connectivity supports the multi-platform environment
-
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
(*1)
(300GB/450GB/600GB; 15,000rpm), and 2.5" SAS disks
SAS: Serial Attached SCSI
SSD: Solid State Drive
Disks and drive enclosures can be added during the system operation.
RAID group capacity can be expanded by adding disk from the unit of one.
Volume can be expanded during the system operation. Even when the work load
increased rapidly, the ETERNUS DX60/DX80/DX90 flexibly expand the volume capacity
with no interruption of the operation.
FC-SAN, IP-SAN, and DAS environments are supported, with Fibre Channel (maximum
transfer speed: 8Gbit/s), iSCSI (maximum transfer speed: 1Gbit/s), and SAS (maximum
transfer speed: 3Gbit/s) host interfaces being used, respectively.
(*1)
(750GB/1TB/2TB; 7,200rpm).
(*2)
(100GB/200GB) and 2.5" SSDs
23
(*1)
(146GB/
(*2)
(100GB/200GB) are
Copyright 2010 FUJITSU LIMITED