Figure 8.4 [Add Drive Enclosure] - Workflow Sequence Screen 1 - Fujitsu Eternus DX60 User Manual

Chapter 8 Installing Optional Products
> 8.2 Drive Enclosure Installation
5
6
7
8
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
The screen that indicates a procedure for adding drive enclosures appears.
Figure 8.4 [Add Drive Enclosure] - Workflow Sequence screen 1
Connect the miniSAS cable (for drive enclosures).
Refer to "6.6 MiniSAS Cable Connection (For Drive Enclosures)" (page 117)
appropriate procedure.
Connect the drive enclosure's power cord.
The drive enclosure turns on.
Refer to "6.7 Power Cord Connection" (page 123)
Check that the drive enclosure's POWER LED and READY LED are on.
Click the [Next >] button.
The drive enclosure recognition process is performed. When the process completes, the
drive enclosure's AUTO POWER switch check procedure screen is displayed.
for the appropriate procedure.
Drive enclosure
199
for the
Copyright 2010 FUJITSU LIMITED