When 1U Ac Outlet Box Is Installed - Fujitsu Eternus DX60 User Manual

Chapter 6 Cable Connection
> 6.7 Power Cord Connection
6.7.2

When 1U AC Outlet Box is Installed

The following explains how to connect the power cord when 1U AC outlet box is installed.
IMPORTANT
Procedure
1
2
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
To help with power cord management and prevent incorrect connections,
attach labels to the power cords and make a note of connection origins and
destinations.
Remove the power cord clamps from the AC outlet box.
AC outlet box
Connect the AC outlet box outlets and power supply unit inlets with power cord
(AC output cables) (4m).
The procedures to connect the power supply unit is the same as the
No AC Outlet Box" (page
Each enclosure has two power supply units (PSU#0 and PSU#1).
IMPORTANT
The power cords must be connected to the inlets of both power
supply units.
Power cord clamps
124).
126
Step 1 in "6.7.1 With
Copyright 2010 FUJITSU LIMITED