Figure 7.7 [Set Fc Port Parameters] Screen (For The "Fc-Ca" Port Mode) - Fujitsu Eternus DX60 User Manual

Chapter 7 Setup
> 7.2 Basic Setup
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
For Fibre Channel
On the [Set FC Port Parameters] screen, set the information (detailed Fibre Channel port
information) for the connection between the FC ports of the ETERNUS DX60/DX80/DX90
and server, or between the FC ports of the local and remote devices.
(1)
Select a port and specify the necessary items in "Port Settings", and click the [Next >]
button.
Figure 7.7 [Set FC Port Parameters] screen (for the "FC-CA" Port Mode)
A confirmation screen appears.
(2)
Click the [OK] button.
The port parameters are set, and the [Setup Network Environment] screen appears.
145
Copyright 2010 FUJITSU LIMITED