Table of Contents
Advertisement
Chapter 2 Preparations
1.23
8x 3.5 inch drive model Optical disk drive
With an 8x 3.5 drive model, an optional optical disk drive can be installed inside the power switch module.
Installing an optical disk drive (N8151-137/138)
Before installing the option, prepare the followings.
Parts included in the option kit
T-10 hexalobular driver
DVD-ROM drive (N8151-137), or DVD-Dual drive (N8151-138)
When installing the components, follow the steps below.
1.
Back up all data in the server.
2.
See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
Lift up the levers on both sides of fan cage, and pull the fan cage upward to dismantle it.
4.
Disconnect the cables connected to the power switch module.
Write down the cables disconnected and their positions.
Power switch module
Note
In order to prevent the damage for the electronic parts, start the installation of
system after providing proper anti-static treatment. If a proper earth is not
provided, electrostatic discharge may occur.
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
Optical disk drive blank cover
143
Advertisement
Table of Contents
