Typically, you install top and side masking to allow a greater range of adjustment.
5.9
Display Non-Cinema Content
To display content from standard or high definition non-cinema sources, connect the source to the DVI-D A
and DVI-D B ports on the input panel. The DVI port auto-detects progressive scan and digital RGB sources
and displays them in their original format. Using two DVI ports as a higher-bandwidth dual-link or twin-link
pair is not supported. For a list of compatible non-cinema DVI sources, see
tions.
5.9.1
Select a Source
The projector uses pre-configured channels to determine how to display images from different sources. Each
channel file contains the optimum processing and display settings for the source. You select channels on the
Main Touch Pad Controller (TPC) screen. If the channel you need is not listed on the Main panel, click All.
CP4230 User Manual
020-100621-02 Rev. 1 (01-2012)
Downloaded From projector-manual.com Christie Manuals
Figure 5-5 Top Masking for Scope
Section 5: Projector Operation
Section Appendix A: Specifica-
5-9