Display Non-Cinema Content; Select A Source - Christie CP4230 User Manual

Section 5: Cinema Projector Operation
Figure 5-5 Top Masking for Scope
5.9

Display Non-Cinema Content

To display content from standard or high definition non-cinema sources, connect the source to the DVI-D A
and DVI-D B ports on the input panel. The DVI port auto-detects progressive scan and digital RGB sources
and displays them in their original format. Using two DVI ports as a higher-bandwidth dual-link or twin-link
pair is not supported.
5.9.1

Select a Source

The cinema projector uses pre-configured channels to determine how to display images from different sources.
Each channel file contains the optimum processing and display settings for the source. You select channels on
the Main Touch Pad Controller (TPC) screen. If the channel you need is not listed on the Main panel, click All.
5-10 CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)