Connect A Video Source Via Displayport; Connect A Video Source Via Dvi; Connect A Computer Or Server - Christie D4K2560 User Manual

Hide thumbs Also See for D4K2560:

Table of Contents

Connect Devices

Connect a Video Source via DisplayPort

The Twin DisplayPort Input Card (TDPIC) accepts digital image data from DisplayPort inputs.

Connect 4 DisplayPort cables to the 1-IN and 2-IN inputs of both TDPIC input cards. Each DisplayPort

input supplies one quadrant of the 4K input image.

The optional Dual DVI Input Card (DDIC) accepts digital image data from DVI inputs. To connect a

4K source via DVI, the projector requires 4 optional DDIC input cards to be installed. Connect 4 DVI

cables to the DVI input on each of the 4 installed DDIC input cards. Each DVI input supplies one

quadrant of the 4K input image.

Dual Link DVI Input

To communicate with a remote computer, server or an existing network, use an RJ-45 cable to

connect the Ethernet hub or switch to the Ethernet port, located on the projector MCPU faceplate.

When using the Christie serial protocol over Ethernet, connect to port 3002.

For applications or equipment utilizing serial communications, use the Christie-proprietary serial

protocol to communicate with the RS-422 port or the RS-232 ports on the MCPU faceplate.

The RS-232 port located on the MCPU faceplate utilizes Christie-proprietary protocol and is

intended for Christie accessories or automation controllers only.

PWR

1 - Dual Link DVI-I

Analog

Digital

2 - VGA

Signal

D4K2560 User Manual

020-101076-01 Rev. 1 (06-2013)

Table of Contents