3.1
Connect a Computer or Server
To communicate with the projector from a computer, server or an existing network, connect the equipment to
the Ethernet hub or switch.
For applications or equipment utilizing serial communications, use the Christie-proprietary serial protocol to
connect to the RS232 PIB port on the PIB. When using Christie serial protocol over Ethernet connect to port
5000. NOTICE: The RS232 PIB port located on the PIB faceplate utilizes Christie-proprietary protocol and is
intended for Christie accessories or automation controllers only.
CP4230 User Manual
020-100621-02 Rev. 1 (1-2012)
Downloaded From projector-manual.com Christie Manuals
From External
Ethernet Hub
From PC
Serial Link
Serial link
PC
Ethernet
link
Cinema Server
Section 3: Connecting Devices to the Projector
PC
Connect serial links
to RS-232
PIB
only
3-3