Assembly - Stairmaster StepMill SM916 Assembly Manual

The following instructions provide direction to assemble the StairMaster
the manual are given with the orientation of standing on a level surface and facing the machine.
Figure 1
2
Figure

Assembly

Step 1: Unpacking the StepMill® SM 916
Tools
1-1 Remove the outer cardboard box using the
hammer to remove staples along the bottom of
the box.
1-2 With a hammer or pry bar, remove the wood
securing the back of the machine to the pallet
(see Figure 1).
Step 2: Remove from pallet
Parts
Tools
2-1 Cut the Tywraps holding the Hand Rails to Box 2
and set Hand Rails to the side.
2-2 Remove Box 1and 2 and set to the side.
Use a second person when performing
assembly steps requiring heavy lifting or
awkward movements.
2-3 With the assistance of another person, remove
StepMill
9
Assembly Manual
® ® SM 916 . All instructions in
StepMill
®
Base
® machine from the pallet.