Stairmaster StepMill SM916 Assembly Manual page 12

Figure 6A
Figure 6B
Assembly
Step 6: Install Top Cover
Parts
Hardware
Tools
6-1 Remove the top Rivets and upper side Rivets on both
left and right side covers to install the Top Cover
(Figure 6 A). It may be necessary to pull the sides out
slightly to insert the Top Cover under the side covers.
6-2 Align the holes of the Side and Top covers to the
holes in the frame. Insert 1 New Rivet for each hole
and push until the rivet is fully inserted (Figure 6 B).
12
Assembly Manual