Stairmaster StepMill SM916 Assembly Manual page 14

Assembly
Figure 8
Figure 9
Step 8: Install Cup Holder
Parts
Hardware
8-1 Attach the Cup Holder to the Mast with 3 Button
Head Screws (Figure 8).
Step 9: Remove Transport Wheels
Parts
Use a second person when performing assembly
steps requiring heavy lifting or awkward
movements.
9-1 Roll the StepMill
9-2 With the assistance of another person, tilt the
®
StepMill machine to one side and remove the Cotter
Pin, the Clevis pin and the Wheel (Figure 9 ). Repeat
for the opposite side.
NOTE: Retain the Cotter pins, Clevis pins and Wheels for
moving the machine in the future.
9-3 Adjust the Levelers as needed.
14
Assembly Manual
®
machine to the workout location.