Configuration Codes - Stairmaster StepMill SM916 Assembly Manual

3. To exit MAINTENANCE LOG, press the [CLEAR] key.

Configuration Codes

1. Press [Level: UP], [8], [ENTER]. The console will display CONFIGURATION.
2. Press [Level: UP] or [Level: DOWN] to scan through the choices. Select the
option you want by pressing [ENTER].
Change Machine
Changes the machine type from StairClimber, StepMill
Bike rev A or Elliptical. Scroll through the screen until CHANGE MACHINE is
displayed. Press (ENTER), then press [Level: UP] or [Level: DOWN] to scan
through the choices. Select the machine type you want by pressing [ENTER].
Reset Data Set Up
Scroll through the screen until RESET DATA SET UP is displayed and press
(ENTER). All customized customer settings will be cleared.
NOTE: The Console will need to be reconfigured.
Clear Error Log
Scroll through the screen until CLEAR ERROR LOG is displayed and press
(ENTER). The word DONE will appear and all accumulated errors in the Erro
Log will be cleared.
Reset Console
Scroll through the screen until RESET CONSOLE is displayed and press
(ENTER). Resets all defaults to original manufacturing settings.
NOTE: The Console will need to be reconfigured.
Operation
39
Owner's Manual
machine, Bike rev B,
®