Stairmaster StepMill SM916 Assembly Manual page 13

Figure 7A
J6 Polar HR
20 Pin Connector
7 B
Figure
Figure 7 C
Assembly
Step 7: Install Console
Parts
Hardware
Tools
7-1 Connect the cables from the Mast to the 20 pin
connector on the PC board (Figure 7A & 7B).
7-2 Connect the telemetry Heart Rate (Polar HR) cable to
the J6 connector at the top of the PC board (Figure
7A & 7 B).
7-3 Align the console to the plate at the top of the Mast
and secure with 4 Phillips Head Screws.
NOTE: Make sure the cables are not crimped or pinched
while attaching the Console to the Mast.
13
Assembly Manual