Machine Status Codes - Stairmaster StepMill SM916 Assembly Manual

Machine Status Codes

To view maintenance information such as the run time in hours, number of workouts
and distance, as well a machine type and software revision:
1. Press [Level: UP], [4], [ENTER]. The console will display MACHINE STATUS
2. Press [Level: UP] or [Level: DOWN] to scan through the choices to view. Press
[CLEAR] to exit the machine status codes.
Machine run time in hours
Display the machine run time in hours. The console will display RUN HOURS
#####.
Number of workouts
Display the number of times a workout key has been pressed. The console will
display WORKOUTS ####.
Floors
Display the total floors traveled. The console will display FLOOR #####.
Software revision
Display the console software revision number. The console will display CONS
41375-###.
Machine type
Display the machine type the console is currently configured to. The console
will display STEPMILL or other machine type.
Machine run time in hours since last cleared (used for maintenance)
Display the machine run time since last cleared. The console will display
MAINT HOURS #####. This will provide the number of hours between service
or maintenance calls. The machine run time is reset to zero in the following
Diagnostics section.
3. To exit MACHINE STATUS, press the [CLEAR] key.
Operation
36
Owner's Manual