Stairmaster StepMill SM916 Assembly Manual page 11

Figure 4
Figure 5A
5B
Figure
Assembly
Step 4: Attach Mast
Parts
Hardware
4-1 Locate the two sets of cables for the console, feed
the cables through the bottom of the Mast to the top
and secure to the top plate.
4-2 Attach the Mast to the base with 4 Hex screws,
4 Washers and 4 Nuts (Figure 4).
Step 5: Attach Hand Rails
Parts
Hardware
NOTE: Complete each step for one side and repeat for
the opposite side.
5-1 Attach the Left Hand Rail to the Mast with 2 Button
Head Screws (Figure 5A).
5-2 Attach the Left Hand Rail to the Base with 2 Button
Head Screws (Figure 5B).
11
Assembly Manual