Safety Warnings - Stairmaster StepMill SM916 Assembly Manual

This icon means a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Obey the following warnings:
Read and understand all Warnings on this machine. Specific Caution, Warning and/or Danger decals
may be applied to call attention to specific hazards.
Carefully read and understand the Assembly Manual before you work on this machine. Failure to follow
instructions and Safety Warnings could result in injury to the person assembling the product or bystanders.
Keep bystanders and Children away from the product being assembled at all times.
Do not connect power supply to the machine until instructed to do so.
Do not assemble equipment in a wet or damp location.
Make sure assembly is performed in an appropriate work space away from foot traffic and exposure to
bystanders.
Some components of the machine may be heavy or awkward. Use a second person when performing
assembly steps involving these parts. Do not perform steps that require heavy lifting or awkward
movements on your own.
Do not attempt to modify the design or functionality of this machine. This could compromise safety and may
void the warranty.
Should replacement parts be required use only genuine Nautilus replacement parts and hardware. Failure
to use genuine replacement parts may cause a risk to users, keep the machine from operating properly or
void the warranty.
Do not use or place the machine into service until the machine has been fully assembled and inspected for
proper performance in accordance with the Owner's Manual.
Warn bystanders to keep a safe distance, at least 3 feet (1 m). Do not allow anyone to touch the operator
while the machine is in motion.
Do not over exert yourself during exercise. Do not try to exercise with more resistance than you can
physically handle.
Important Safety Warnings
Assembly Manual
3