Assembly - Stairmaster TwistLock Dumbbell Owner's Manual

Page 2

Assembly

Unboxing
Take special care to remove the dumbbells from their cartons and protective packaging because the product is heavy. Inspect
all parts for any signs of damage. If product is damaged, then do not use and contact StairMaster customer service immedi-
ately.
Assembly
NOTE: If assembling with the TwistLock Dumbbell Stand, then please build stand first. Then properly attach cradles to stand
before assembling dumbbells.
STEP 1 Place the cradle on a flat stable surface.
STEP 2 Starting with the furthest outside plate, insert 4 of the large 5 lb plates into each side of the cradle working your way
inward toward the center. Plates must be facing in the proper direction (see diagram below).
STEP 3 Insert the 2 smaller 2.5 lb plates. Plates must be facing in the proper direction (see diagram below).
STEP 4 Insert the handle into the cradle with weight adjustment windows facing up. Handle can be placed in either direction.
PLATE, 2.5 LBS
HANDLE
WEIGHT ADJUSTMENT WINDOW
PLATE, 5 LBS
CRADLE