Chapter 2
A4
[1]
8) Affix the caution sheet printed in an appropriate language.
[1]
9) Align the left, right, and leading edges of sheets and load the stack of paper
in the cassette. Make sure that the paper is below the claws of the cassette.
MEMO:
Inserting the cassette into the iR body with the inner plate locked into the cas-
sette will unlock the inner plate automatically. If the inner plate is not locked,
press the "PUSH DOWN" mark [1] on the inner plate to lock it into the cas-
sette and then load paper.
[2]
10) Holding the knob at the center of the cassette, insert the cassette in the iR
body until it stops.
2.2.7 Attaching the Ferrite Core
iR2016 / iR2020
(iR2020/iR2016 only for North America, Latin America, and Asia)
1) Attach the ferrite core [1] to the USB cable [2].
To suppress noise, attach the ferrite core as close as possible to the USB port
of the iR body.
2-10
[2]
F-2-36
F-2-37
[1]
F-2-38
2.2.8 Attaching the Ferrite Core
iR2016i / iR2020i
1) Attach the ferrite core [2] to the user's USB cable, and then connect the
USB cable to the USB port of the host machine.
To reduce noise, attach the ferrite core as close to the USB port of the host
machine as possible.
2.2.9 Checking the Image Quality
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Plug the power cord into the outlet, and then turn on the main power
switch [2].
Supply of toner will start after the initial rotation. After a few minutes,
supply of toner finishes and the machine stops automatically.
Use the specified power supply (rated voltage -/+10% and rated current).
0011-1523
2) Place a document on the document glass, take a copy of it by supplying
paper from the cassette or manual feed tray, and check the printed image.
Also perform the following checks:
- Check whether abnormal sound is heard.
[1]
[2]
F-2-39
[2]
[1]
F-2-40
[1]
[2]
F-2-41
0012-6451
0011-1075