Chapter 9
[2]
[1]
3) Disconnect the connector [1], and then release the harness from the wire
saddle [2].
[1]
4) Remove the two screws [1], and then remove the duct [2].
5) Remove the fixing heart discharge fan [1].
9-16
[1]
F-9-75
[2]
F-9-76
[2]
[1]
F-9-77
9.4.9 Fan Filter
9.4.9.1 Removing the Fan Filter
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the left door until it stops.
2) Remove the four screws [1], and then remove the transfer/registration unit
[2].
[2]
[1]
3) Disconnect the connector [1], and then release the harness from the wire
saddle [2].
[1]
4) Remove the two screws [1], and then remove the duct [2].
[1]
F-9-78
[1]
F-9-79
[2]
F-9-80
0011-0418