2.5.3 Installation Procedure
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Turn off the main power switch [1] of the host machine and disconnect the power plug [2] from the outlet.
2) Remove the four screws, and then detach the rear cover [1].
3) Remove the screw [1] from the card reader.
MEMO:
The removed screw will be used later.
4) Remove the screw [1] securing the ground cable, and then separate the card reader [3] from the card reader mount [2].
[3]
Harness cover (base + lid)
[4]
Repeating harness B
[5]
Edge saddle
[6]
TP screw
[7]
Binding screw (M4x6)
[1]
F-2-51
F-2-52
[1]
F-2-53
[1]
[2]
F-2-54
3 pcs.
1 pc.
1 pc.
2 pcs.
4 pcs.
[2]
[1]
[3]
Chapter 2
0011-1082
2-19