Setting The Date And Time; Attaching Other Parts; Checking The Connection To The Network; Checking The Network Connection - Canon iR2020 Series Service Manual

Chapter 2

2.2.13 Setting the Date and Time

iR2016i / iR2020i
1) Press key to display the user mode screen.
2) Select "TIMER SETTINGS" and then press the OK.
3) Select "DATE&TIME SETTING", and then press the OK. The set date
and time appears.
4) Enter the current date and time with the ten keys.
5) Press the OK to allow the entered date and time to take effect.

2.2.14 Attaching Other Parts

iR2016i / iR2020i
a. Finger pinch caution label
1) Open the DADF and affix the supplied finger pinch caution label.
Affix the label printed in the user-selected language.
b. Scan glass cleaning label
1) Affix the supplied scan glass cleaning label [1] to the reader front cover
with it aligned with the mark-off line [2].
Affix the label printed in the user-selected language.
C. Document size label
The purpose of this label is to facilitate the size adjustment made from the
view point of each user.
1) Align the side guide (rear) [1] to "A4/A3" "LTR/11X17" [2].
2) Affix the label of the series matching the document size label [3] to the
feeder cover.
Adjust the label position by moving it back and forth (in the direction of
the arrow [5]) according to the view point of the user so that the indicator
[4] on the side guide (front) meets the indicator on the size label, and then
affix the label securely.
2-12
F-2-42
F-2-43
0012-6455
0012-6456
[4]
d. Black streak cleaning instruction label
1) Affix the black streak cleaning instruction label [1] to the feeder cover of
the DADF.
Affix the label printed in the user-selected language.

2.3 Checking the Connection to the Network

2.3.1 Checking the Network Connection

iR2016 / iR2020
[1]
[2]
[3]
[5]
F-2-44
F-2-45
0011-1079