Removing The Fixing Unit Drive Motor; Left Door; Removing The Drum Unit - Canon iR2020 Series Service Manual

Chapter 9
1) Disconnect the two reader flexible cables [1]. Release the harness [2] from
the wire saddles [3]. Remove the two screws [4], and then detach the
flexible cable cover [5].
[4]
[1]
2) Turn over the reader flexible cable cover [1], and then secure to the back
of the reader temporarily using a screw [2].
[2]
[1]
3) Disconnect all connectors and remove the five screws [2], then remove the
image processor PCB with the PCB mount.
9-20
[3]
[2]
F-9-101
F-9-102
[1]

9.4.11.9 Removing the Fixing Unit Drive Motor

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector [1], remove the two screws [2], and then remove
the fixing motor [3].
[2]

9.4.12 Left Door

9.4.12.1 Removing the Drum Unit

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover [1].
2) Turn the developing assembly locking lever [2] clockwise to open the left
door [3].
3) Draw out the drum unit [4].
[4]
[3]
[2]
- When attaching or detaching the drum unit, open the left door fully to pre-
vent the damage to the drum unit.
- To prevent exposure of the drum, cover the drum unit with a few sheets of
paper and place it in a safe place.
[2] [1]
[1]
F-9-103
[1] [3]
F-9-104
[1]
F-9-105
0011-0629
0010-9897