Chapter 4
4.4.4.2 Removing the Right Cover (Lower)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the front cover.
2) Remove the five screws [1]. Remove the two hooks [2], and then detach
the right cover (lower) [3].
[1]
4.4.4.3 Removing the Right Cover (Upper)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the screw [1], and then detach the right cover (upper).
4.4.4.4 Removing the Left Cover (Rear)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
4-22
[1]
[2]
[1]
F-4-64
[3]
[2]
F-4-65
[1]
[2]
F-4-66
[2]
[1]
0010-6101
4.4.4.5 Removing the Reader Rear Cover
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Open the copyboard cover (or ADF).
2) Remove the screw, and then detach the small cover [2].
0010-6102
3) Remove the screw [1], and then disconnect the ground cable [2] of the
ADF harness.
4) Disconnect the four connectors [3], and then remove the ADF harness [4].
0010-6103
When installing the ADF harness [4], fit the harness band [5] in the
groove in the reader rear cover.
5) Remove the four screws [1], and then detach the reader rear cover [2].
F-4-67
[1]
[2]
F-4-68
[3]
[2]
[5]
[4]
F-4-69
0010-6104
[1]