Canon iR2020 Series Service Manual page 87

If the machine supports a network feature, check the network connection fol-
lowing the procedure below.
1) Press the following keys to display the service mode screen:
Additional Functions Key > 2 Key > 8 Key > Additional Functions Key
2) Select "# REPORT" using the + or - key, and then press the OK key.
3) Select "REPORT OUTPUT" using the + or - key, and then press the OK
key.
4) Select "SPEC LIST" using the + or - key, and then press the OK key.
5) When "SPEC REPORT" is displayed, check that "BDL-IMAGE" is set to
ON.
MEMO:
"SPEC REPORT"
- TOTAL MEMORY: 128MB
BDL-IMAGE (600) must be set to ON.
- TOTAL MEMORY: 256MB
BDL-IMAGE (1200) must be set to ON.
6) Contact the system administrator of the customer to make network
settings.
Chapter 2
2-13