Registering The Card Ids - Canon iR2020 Series Service Manual

Chapter 2

2.5.5 Registering the Card IDs

0012-7190
iR2016i / iR2020i
After installing the card reader-E1, register the card numbers to be used in the service mode of the iR body. If they are not registered, cards will not be recognized
when inserted.
1) Plug the power cord [1] into the outlet, and then turn on the main power switch [2].
[1]
[2]
F-2-73
2) Press the following keys to display the service mode screen:
> 2 Key > 8 Key >
3) Select "# ACC" using and , and then press the OK.
4) Select "CARD" using and , and then press the OK.
5) Specify the first ID number of the card ID numbers to be registered, and then press the OK.
Sequential Card ID numbers of 1000 cards are automatically registered in the department ID, starting with the specified card ID number.
6) Press key to enter the user mode.
7) Select "System Settings."
8) Select "Department ID Management."
9) Select "ON" and then press the OK.
10) Turn main power switch off and on again. Check that "Insert Card" appears.
2-25