Finisher Error Codes; Error Code Details; Jam Codes (Related To Inner 2-Way Tray) - Canon iR2020 Series Service Manual

Canon ir2020/2016 series service manual
Hide thumbs Also See for iR2020 Series:
Table of Contents

Advertisement

Chapter 13
Code
0130
0231
0033
0035
1036
1137
13.3.3 Jam Codes (Related to ADF)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Code
0000
0007
0008
0009
000a
000c
000d
000e
000f
0010
13.3.4 Jam Codes (Related to Duplex Unit)
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
0120
0124
0221
0228

13.3.5 Jam Codes (Related to Inner 2-way Tray)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Code
010e
0212

13.4 Finisher Error Codes

13.4.1 Error Code Details

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
13-4
Name
Sensor No.
Delayed feed jam
PI5
Staying paper jam
PI5
Stack ejection jam
PI1
Staple jam
Stapler HP
sensor
(built in
stapler)
Power-on jam
PI5
Door open jam
SW1
Name
Sensor No.
Unknown jam
-
Initial stationary
PI6,PI7,PI8 Paper is detected in the transport path before the DADF starts initial
Read sensor delay
PI7,PI8
Read sensor stationary
PI7
Paper absence (Pull out
PI11
the document.)
Delivery reversal sensor
PI6,PI7
delay
Delivery reversal sensor
PI6
stationary
ADF cover open
PI10
User ADF open
sensor of
the reader
unit
Pickup NG
-
Code
Name
Sensor No.
Delay jam at duplex
SR1002
paper sensor 1
Delay jam at duplex
SR1003
paper sensor 2
Stationary jam at
SR1002
duplex paper sensor 1
Stationary jam at
SR1003
duplex paper sensor 2
Name
Sensor No.
Delay jam at No.2
SR1101
delivery section
Stationary jam at No.2
SR1101
delivery section
T-13-4
Description
The inlet sensor is not turned on within the specified time after
reception of a paper ejection signal from the host machine.
The inlet sensor is not turned off even if paper is fed by the specified
distance after the leading edge of the paper from the host machine
has passed through the sensor.
When a paper stack is ejected, the HP sensor is not turned off within
the specified time.
The stapler HP sensor was turned off once after start of stapler
operation, but the HP has not been reached within the specified
time.
The inlet sensor detected paper at power-on.
The front cover switch detected opening of the front cover during
standby or copy operation.
T-13-5
Description
Other errors
operation.
The read sensor does not detect paper when the paper has been fed
by the predetermined distance since reception of a pickup request.
The trailing edge of paper is not detected when the paper has been
fed by the predetermined distance since detection of it by the read
sensor.
The Document set sensor has been held off since start of pickup.
The delivery reversal sensor does not detect paper since the paper
has been fed by the predetermined distance since the read sensor
was turned on.
The trailing edge of paper is not detected when the paper has been
fed by the predetermined distance since the delivery reversal sensor
detected the paper.
The feeder cover was opened during operation (of the drive system).
The ADF was opened during operation (of the drive system).
The registration sensor has been held off since paper pickup started.
T-13-6
Description
The duplex paper sensor 1 does not turn on within the specified
time after the delivery sensor on the main unit side turns on.
The duplex paper sensor 2 does not turn on within the specified
time after the duplex reverse motor starts.
- The duplex paper sensor 1 does not turn off when the specified
time has lapsed since the duplex paper sensor 2 turned on.
- The duplex paper sensor 1 does not turn off when the paper
with a longitudinal length of 280 mm reaches the standby
position (about 90 mm from the duplex paper sensor 2).
The duplex paper sensor 2 does not turn off when the specified
time has lapsed since the feed motor started.
T-13-7
Description
The No.2 delivery sensor does not detect presence of paper within
the specified time after turning on of the fixing delivery sensor.
Absence of paper is not detected within the specified time after
turning on of the No.2 delivery sensor.
0011-2839
0011-2840
0011-2850
0011-2652

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir2016 series

Table of Contents