Removing The Left Cover (Rear); Removing The Left Door; Removing The Fixing Unit - Canon iR2020 Series Service Manual

Chapter 8

8.4.5.3 Removing the Left Cover (Rear)

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
[2]
[1]

8.4.5.4 Removing the Left Door

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the screw [1] securing the door support band. Remove the
connector [2] and reusable band [3], and release the duplex unit harness
from the wire saddle [4].
[2]
2) Open the left door until it sops and pull out the hinge shaft [1].
MEMO:
When a duplex unit (option) is installed, remove it before pulling out the
hinge shaft for each access.
8-20
[1]
[2]
[1]
F-8-90
F-8-91
[1]
[3] [4]
F-8-92
0010-9919
[1]
3) Lift the left door with both hands to release it from the door rotation shaft
[1], and then remove the left door.
0010-9920
[1]

8.4.5.5 Removing the Fixing Unit

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the two screws [1], and then detach the inner cover [2] at the
upper front.
F-8-93
F-8-94
0010-9921