Installing The Cassette Heater; Preparing The Parts; Preparing The Host Machine - Canon iR2020 Series Service Manual

Chapter 2

2.8 Installing the Cassette Heater

2.8.1 Preparing the parts

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing the cassette heater, make sure the heater PCB has been installed.
1) Prepare the following parts.

2.8.2 Preparing the Host Machine

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing the cassette heater unit 30, make sure the host machine is turned off. If it is turned on, go through the following:
1. Turn off the main power switch.
2. Disconnect the power cable (from the power outlet).
3. Disconnect the power cable.
1) Remove the four screws [1], and then detach the rear cover [2].

2.8.3 Installing the Cassette Heater

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Insert the cassette heater [1] from behind the host machine.
2-42
[1]
F-2-108
[1] Cassette heater
[2] P tightening screw (M4x8)
F-2-109
F-2-110
[2]
1 pc.
1 pc.
0011-3181
0011-3182
0011-3620