2.6 Installing the Cassette Heater
2.6.1 Preparing the parts
Before installing the cassette heater, make sure the heater PCB has been
installed.
1) Prepare the following parts.
[1]
No.
Part name
[1]
Cassette heater
[2]
P tightening screw (M4x8)
2.6.2 Installing the Cassette Heater
Before installing, make sure the host machine is turned off. If it is turned on,
go through the following:
1. Turn off the main power switch.
2. Disconnect the power cable (from the power outlet).
3. Disconnect the power cable.
[1]
[2]
F-2-84
Part number
QTY
FK2-1088-000
1 pc.
(230V)
XB4-5400-809
1 pc.
[2]
[3]
F-2-85
1) Remove the rear cover [1].
- Screws [2], 4 pcs.
0020-4271
[2]
0020-4272
2) Insert the cassette heater [1] from behind the host machine.
When installing the cassette heater unit, make sure that harness is not
pinched.
Chapter 2
[1]
F-2-86
2-33