Native Instruments O Kore 2 Operation Manual page 57

Hardware Options
The Hardware Options screen mirrors the parameters from the KORE 2
Controller's Options Menu.
►
t S allows you to adjust the sensitivity of the eight touch-
ouCH enSitiVity
sensitive knobs. If set to zero the touch sensor is inactive.
►
S integrates (from a mathematical standpoint) the data created
MootHing
by knob movements for a "smoother" feel.
►
C sets the ratio of light to dark in the display to compensate for
ontraSt
different lighting conditions.
►
B controls the display's brightness.
aCKligHt
►
r r determines how often the state of the LEDs and the
eFreSH ate
display's contents are updated.
►
i d changes the default red on black lettering to black
nVert iSPlay
lettering on a red background.
►
led B l
rigHtneSS ow
the knobs for the off/untouched state. Note that for unassigned or
deactivated controls the LED is switched off completely.
►
led B H
rigHtneSS igH
on/touched state of the controls.
►
The P r
edal eCaliBrate
(see below).
Calibration of pedals
If you get the feeling that your connected pedals start to act funny, use
the r command from the hardware options.
eCaliBrate
adjusts the brightness of the LED ring around
is the corresponding brightness control for the
command is for calibrating any connected pedals
KORE 2 – 57