Advertisement
Label
High Cut
Low-High
Spread
3.8.30 Space Reverb
This reverb unit provides an extended parametric control of reverb with
pre-delay, early and late reflections, as well as separate control of low and
high frequency decay times.
Sets the cutoff frequency of a shelving high-pass filter. All frequencies below
this value are attenuated.
This controls the balance bewteen the the treble and bass speaker outputs.
When turned all the way to the right you hear only the treble rotor. Fully left and
only the bass rotor is heard. With the knob centered you get an even mix of the
two rotors.
The Spread setting determines the difference between the left and right virtual
microphone signals by moving the microphones away from each other by a cer-
tain distance. This provides a perceived "width" or stereo spread when the Rota-
tor is spinning. With Spread set to minimum, both mics are in the same place.
As Spread is increased they move around the speaker cabinet in a circle, but in
opposite directions. With Spread set to maximum they are at opposite sides.
Function
Range
Unit
500..16000
Hz
-100..+100
%
-180..+180
deg
KORE 2 – 178
Advertisement
