Native Instruments O Kore 2 Operation Manual page 158

3.8.17 Graphic EQ
The g e divides an editable part of the frequency spectrum
raPHiC Qualizer
into eight bands of equal width (based on a percentage of the overall
selected frequency spectrum). Each band's gain can be adjusted separately
to boost or attenuate specific parts of the sound's frequency spectrum.
This can be useful to integrate sounds into a mix or to change the sound's
character.
Label
Low End
Width
Gain 1..8
Gain Adjust
Sets the low end of the modified frequency spectrum, used as center frequency
of the first band.
Determines the width of the modified frequency spectrum. This value, divided by
eight, also defines the width of each band.
Sets the gain change of each band, respectively.
Sets the amount of gain correction applied to the final output signal, compensat-
ing for any volume loss that occurs while attenuating the bands.
Function Range Unit
20..8000 Hz
Oc-
1..12
taves
-20..+20 dB
-20..+20 dB
KORE 2 – 158