Stereo Chorus - Native Instruments O Kore 2 Operation Manual

3.8.31 Stereo Chorus

This effect implements a standard stereo chorus/flanger unit: The two
input signals are delayed by a small amount, and the delay times are
constantly modulated.
Label
Mix
Delay Tune
Delay LR Offset
Modulation Syn
Modulation Rate
Modulation Depth
Controls the balance between the dry, unprocessed signal (at the left) and the
wet, processed signal (at the right).
Sets the tuning of the effect; technically, this adjusts the effect's delay time.
Controls the difference between delay times of the left and right channel. At
negative values the left channel delay is shorter; at positive values the right
channel delay time is shorter. At mid position both use the same delay time.
Synchronizes the frequency of the LFO to KORE 2's time base
Adjusts the delay time modulation speed, i.e., the internal LFO's frequency.
Sets the amount of modulation as a percentage of the delay time.
Function Range Unit
0..1
50..10000 Hz
-100 ...
%
+100
On/Off
0..10 Hz
0..100 %
KORE 2 – 180