Advertisement
3.8.21 Mic Conditioner
The M
Conditioner assists you when you plug a microphone directly
iC
into KORE 2. Use it to manipulate phase, filter out unwanted low-frequency
content and correct phase shifts between channels via the two delay
lines. Furthermore, the M
recordings produced by the mid-side recording technique. This is a special
way of stereo recording that allows manipulation of the stereo width after
the recording process.
Label
Invert L/R
High-pass L/R
High-pass Frequency
High-pass Poles
Left/Right Delay Coarse
C
provides facilities for working on
iC
onditioner
Inverts the phase of the left or right channel, respectively.
Switches the high-pass filter for the respective channel on or off.
Sets the threshold below which the incoming signal is attenuated.
Crossfades between a 2-pole and a 4-pole filter. The number of poles defines
the steepness of the filter cutoff slope: At low values the 2-pole setting is used
with a transition band slope of 12 dB per octave; at high values the -pole set-
ting provides a slope of 2 dB per octave.
Controls the coarse delay time for the respective channel.
Function
Range
Unit
On/Off
On/Off
10..500
Hz
0..6
0..95
ms
KORE 2 – 16
Advertisement
