Advertisement
The Control Knobs are touch-sensitive, i.e., if the knob is touched (without
altering its value) the KORE 2 Controller reacts and displays the controller's
name and its current value in the hardware display (32). This is also very
convenient for assigning parameters. Each Control Knob is surrounded by
a Selection Ring that displays a dimmed red light if there is an assignment
(i.e., functionality) present. It blinks when the controller is becoming
assigned, and it is bright red when the knob is touched on the hardware
or clicked in the software.
9-16: Controller Buttons 1-8
The buttons contain a light indicating their on/off state. On the software
level (see the section about Control Pages) the buttons can be used in
gate or toggle mode. They can also be used to recall a Sound Variation's
settings.
17: Stop
Equivalent to the t
ranSPort
18: Start
Equivalent to the t
ranSPort
19: Record
Unused in this version of the KORE 2 software.
20: Pre-Listen
Activates P
-
mode for quickly testing KoreSounds.
re
liSten
a
's S
button.
rea
toP
a
's
button.
rea
Start
KORE 2 – 13
Advertisement
