Advertisement
►
t
(also called trioles) lead to notes that are two thirds as long as
riPletS
the grid width defined by r
button is active, three notes correspond to a half note.
As with any decent step sequencer you can set the length of the produced
notes via the g
parameter.
ate
It ranges from 0% for very short to 100%, which results in notes as long
as a complete step. The last control in the t
factor to the pattern. This factor can be positive and negative, ranging
from -100% to 100%. S
the rhythmical relationship between repeated note pairs and their length.
With a positive Swing setting the initial note of a pair is played longer
while the second becomes shorter. With a negative Swing setting it is the
other way around.
The Pitch section
Use the P
o
knob to set the octave for the complete pattern on a
itCH
CtaVe
range of eight octaves. You can always transpose single steps up or down
for one or two octaves by using the o
P
o
and the transposition via the o
itCH
CtaVe
10 octaves of the MIDI note system.
The S
knob transposes the complete sequence up or down in semitones.
eMi
The range is plus or minus one octave.
. If r
is set to fourth and the triplet
ate
ate
section introduces a S
iMe
is sometimes also called shuffle and skews
wing
a
(see above). Combined, the
CtaVe
rea
CtaVe
wing
a
cover the complete
rea
KORE 2 – 202
Advertisement
