Native Instruments O Kore 2 Operation Manual page 225

Now close Reaktor stand-alone and start Reaktor stand-alone and start stand-alone and start KORE 2. Create a new REAKTOR
instance by dragging the REAKTOR plug-in from the Browser into a
M i . Open the plug-in interface and load the prepared Ensemble.
atrix nSert
With the plug-in interface open, switch to KORE 2's g
create a new u P
Ser age
of the hardware's Controllers move one of the Ensemble's controllers with Controllers move one of the Ensemble's controllers with
the mouse. This connects both elements within the u
linking controls, or click the l
dialog with further options will open. Please refer to chapter 3.5.3 for
details on these options. As mentioned above, u
the KoreSound – not with the Ensemble. Make sure you save the sound
within KORE 2 (see chapter 3.7.). By re-opening this sound, you can
always return to your custom Reaktor automation. Remember that the
REAKTOR plug-in from the Browser into a plug-in from the Browser into a S
, and press the l l
earn Button earn Button
move one of the Ensemble's controllers with
l again to leave this mode. A
earn Button earn Button Button
Reaktor automation. Remember that the automation. Remember that the
REAKTOR
C
loBal ontroller
. While touching one
Button
P . Continue
Ser age
P are saved with are saved with
Ser ageS
ound
,
KORE 2 – 225