Advertisement
3.8.12
Flanger
The F
is a classic modulation effect that produces a metallic,
langer
swooshing sound. It is very versatile and can be used on a wide range
of different material. It works by splitting the input signal into two paths
and delaying one of them by a very short amount. This produces a comb
filter effect.
Label
Inverse
Mix
Center
Mod Sync
Rate
Phase inversion of one of the split signal parts. This produces a different
sound, which acts on the signals of the complete effect, as opposed on [Feed-
back] with negative values (see below).
Controls the balance between the dry, unprocessed signal (at the left) and the
wet, processed signal (at the right).
The higher the value the shorter the internal delay times leading to a shift of
the resulting comb filter effect to higher frequencies. This interacts with the
modulation, as it is added to this value (have a look at the Modulation Meter).
Synchronizes the modulation oscillator to KORE 2's time base.
If [Mod Sync] is off, this controls the frequency of the
modulation oscillator.
Function
Range
Unit
On/Off
0..100
%
0..100
%
On/Off
0.0..25
Hz
KORE 2 – 150
Advertisement
