Native Instruments O Kore 2 Operation Manual page 172

two middle bands are peak equalizers where the gain changes apply to a
band around a center frequency with controllable bandwidth.
Label
Low Gain
Low Frequency
Mid 1 Gain
Mid 2 Gain
Mid 1 Frequency
Mid 2 Frequency
Mid 1 Width
Mid 2 Width
High Gain
High Frequency
Sets the amount of volume change applied to the lowest band.
Sets the frequency of the low shelving equalizer. All frequencies below this
frequency are modified by the equalizer, i.e., their gains are changed according
to the [Low Gain] control.
Sets the amount of volume change applied to the two middle bands respectively.
Sets the center frequencies of the two middle bands, respectively. All frequency
gain around these center frequencies – in a range depending on the [Mid 1/2
Bandwidth] controls – is changed by an amount controlled by the [Mid 1/2 Gain]
controls.
Sets the width of the two middle frequency bands respectively.
Sets the amount of volume change applied to the highest band.
Sets the frequency of the high shelving equalizer. All frequencies above this
frequency are modified by the equalizer, i.e. their gain is changed according to
the [High Gain] control.
Function Range Unit
-20..+20 dB
2..000 Hz
-20..+20 dB
0..8000/
Hz
80..16000
Oc-
0.1..
taves
-20..+20 dB
100Hz...
Hz
20kHz
KORE 2 – 172