Native Instruments O Kore 2 Operation Manual page 197

The F S knob sets the portion of the eight note buffer that the
orCe tePS
Arpeggiator cycles over. As you don't always play an eight note chord, the
Arpeggiator has to decide what to play for the "empty" slots. This choice
is controlled via the M
ode
►
When set to Pause the "empty" slots are replaced by silence.
►
First means, the first note will fill in.
►
Last means the last note will fill in.
►
Cycle steps through the input notes as replacements for the empty
buffer slots.
►
For example: Say you play a chord with the notes CEG, set the F
S parameter to 5 and you are in C
tePS
resulting Arpeggio pattern would be CEGCE.
Combined with the r
ePeat
intricate note patterns.
menu:
yCle
parameters, the Arpeggiator can produce very
orCe
M . In this case the
ode
KORE 2 – 197