Native Instruments O Kore 2 Operation Manual page 188

The four columns of t
which can be changed:
► The t l shows the MIDI file names in the leftmost column. Click
raCK iSt
with your mouse and use the keyboard to change it to your liking.
►
The second column displays the l
bars:beats. This value is just for reference and cannot be changed.
►
The l column defines the point in the MIDI File (or Loop File, see
ooP
below) where the file is played from the start again.
►
The n column lets you define a MIDI note for triggering the
ote
respective track. Click with your mouse and move it up or down to make
a selection from the complete range of MIDI note values (C-2 to G8) or
set it to n , which means the respective track cannot be started via
one
MIDI notes. The trigger mode is described a few paragraphs above.
3.8.35 MIDI Transformator
The Midi t
ranSForMator
incoming MIDI data. Use it to shift or scale the Velocity range of notes,
transpose the pitch of incoming notes or to redirect all passing MIDI data
to a different MIDI Channel.
The C S and i
Hannel eleCt
t receives any MIDI data and on which MIDI channel the data
ranSForMator
l hold the following parameters, most of
raCK iSt
of the loaded files in the format
engtH
provides some convenient tools for changing the
S settings define whether the Midi
nPut ourCe
KORE 2 – 188